1185 lines
753 KiB
Plaintext
1185 lines
753 KiB
Plaintext
----------------------------------------------------------------
|
|
-Report version: 0.1
|
|
-Pin Report - Date: Wed Apr 15 23:06:21 2026 Pinchecksum: NOT-AVAILABLE
|
|
-Product: Designer
|
|
-Release: 2025.1
|
|
-Version: 2025.1.0.14
|
|
-Design Name: top
|
|
-Family: PolarFire
|
|
-Die: MPF300TS
|
|
-Package: FCG1152
|
|
-----------------------------------------------------------------
|
|
|
|
Pin |Port |Function |Bank |State |I/O Std |Direction |Used I/O Reg |User I/O Lock Down |Clamp Diode |Resistor Pull |Use I/O Calibration from the lane |Schmitt Trigger |Vcm Input Range |On Die Termination |Odt Value (Ohm) |Input Delay |Slew |Output Drive (mA) |Impedance (ohm) |Output Load (pF) |Source Termination (Ohm) |Output Delay |Board Layout |
|
|
-----|------------|--------------------------------------------------------|------|--------------|---------|----------|-------------|-------------------|------------|--------------|----------------------------------|----------------|----------------|-------------------|----------------|------------|-----|------------------|----------------|-----------------|-------------------------|-------------|--------------------------------------------------------------------------------------------------------------------------------------------------------|
|
|
A2 --- GPIO251PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
A3 --- GPIO251NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
A4 --- GPIO253NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
A5 --- GPIO255NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
A6 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v
|
|
A7 --- GPIO16PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
A8 --- GPIO16NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
A9 --- GPIO25NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
A10 --- GPIO28NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
A11 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
A12 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
A13 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
A14 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
A15 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
A16 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
A17 --- HSIO44PB6/DQS Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
A18 --- HSIO44NB6/DQS Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
A19 --- HSIO46NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
A20 --- HSIO47NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
A21 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
A22 --- HSIO53PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
A23 --- HSIO53NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
A24 --- HSIO66NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
A25 --- HSIO68PB6/DQS/CCC_SE_PLL1_OUT0 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
A26 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
A27 --- HSIO69PB6/CCC_SE_CLKIN_S_14/CCC_SE_PLL1_OUT0 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
A28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
A29 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
A30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
A31 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
A32 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
A33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AA1 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AA2 --- GPIO190NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AA3 --- GPIO190PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AA4 --- GPIO191PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AA5 --- GPIO191NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AA6 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v
|
|
AA7 --- GPIO196NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AA8 --- GPIO183NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AA9 --- GPIO189NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AA10 REF_CLK_SEL GPIO189PB4 Bank4 Fixed LVCMOS25 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF REF_CLK_SEL
|
|
AA11 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AA12 --- GPIO187NB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AA13 --- GPIO188NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AA14 --- GPIO188PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AA15 --- VDDAUX4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v
|
|
AA16 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AA17 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
AA18 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AA19 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
AA20 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AA21 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
AA22 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AA23 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
AA24 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AA25 --- VDDA25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA25 directly to 2.5v or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDD25A to VSS through resistor (10K ohm)
|
|
AA26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AA27 --- XCVR_0B_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
AA28 --- XCVR_0B_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
AA29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
AA30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AA31 --- XCVR_0_TX2_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AA32 --- XCVR_0_TX2_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AA33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AA34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AB1 --- GPIO176NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AB2 --- GPIO176PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AB3 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v
|
|
AB4 --- GPIO177PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AB5 --- GPIO182PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AB6 --- GPIO179NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AB7 --- GPIO179PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AB8 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AB9 --- GPIO183PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AB10 --- GPIO186NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AB11 --- GPIO186PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AB12 --- GPIO187PB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AB13 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v
|
|
AB14 --- GPIO185PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AB15 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AB16 --- VDD25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD25 to 2.5v
|
|
AB17 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AB18 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v
|
|
AB19 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AB20 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v
|
|
AB21 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AB22 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v
|
|
AB23 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v
|
|
AB24 --- VDD25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD25 to 2.5v
|
|
AB25 --- VDD_XCVR_CLK --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD_XCVR_CLK directly to 2.5v/3.3v when VDDA is connected to 1.0V/1.05V. If VDDA is connected to VSS, VDD_XCVR_CLK must connect to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDD_XCVR_CLK to VSS through resistor (10k ohm)
|
|
AB26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AB27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
AB28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AB29 --- XCVR_0_RX3_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AB30 --- XCVR_0_RX3_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AB31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AB32 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AB33 --- XCVR_0_TX3_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AB34 --- XCVR_0_TX3_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AC1 --- GPIO175PB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AC2 --- GPIO174PB4/CLKIN_W_7/CCC_NW_CLKIN_W_7/CCC_NW_PLL0_OUT0 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AC3 --- GPIO177NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AC4 --- GPIO182NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AC5 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AC6 --- GPIO178NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AC7 --- GPIO178PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AC8 --- GPIO181NB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AC9 --- GPIO181PB4/DQS/CCC_NW_PLL0_OUT0 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AC10 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v
|
|
AC11 --- GPIO184PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AC12 --- GPIO184NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AC13 --- GPIO185NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AC14 --- VDDAUX4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v
|
|
AC15 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v
|
|
AC16 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v
|
|
AC17 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm)
|
|
AC18 --- HSIO119PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AC19 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v
|
|
AC20 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm)
|
|
AC21 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v
|
|
AC22 --- VDDI1 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI1 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm)
|
|
AC23 --- HSIO89NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AC24 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v
|
|
AC25 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AC26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AC27 --- XCVR_2C_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
AC28 --- XCVR_2C_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
AC29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
AC30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AC31 --- XCVR_2_RX0_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AC32 --- XCVR_2_RX0_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AC33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AC34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AD1 --- GPIO175NB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AD2 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AD3 --- GPIO174NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AD4 --- GPIO180PB4/CLKIN_W_6/CCC_NW_CLKIN_W_6/CCC_NW_PLL0_OUT1 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AD5 --- GPIO180NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
AD6 R_DATA[4] HSIO160PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[4]
|
|
AD7 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
AD8 R_DATA[5] HSIO161NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[5]
|
|
AD9 R_DATA[9] HSIO161PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[9]
|
|
AD10 R_DATA[27] HSIO152PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[27]
|
|
AD11 R_DATA[21] HSIO150NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[21]
|
|
AD12 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AD13 R_DATA[17] HSIO151PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[17]
|
|
AD14 R_DATA[31] HSIO151NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[31]
|
|
AD15 --- HSIO131PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AD16 --- HSIO129NB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AD17 --- HSIO127PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AD18 --- HSIO117PB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AD19 --- HSIO119NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AD20 --- HSIO116NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AD21 --- HSIO114PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AD22 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AD23 --- HSIO85NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AD24 --- HSIO89PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AD25 --- HSIO84NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AD26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AD27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
AD28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AD29 --- XCVR_2_RX1_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AD30 --- XCVR_2_RX1_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AD31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AD32 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
AD33 --- XCVR_2_TX0_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AD34 --- XCVR_2_TX0_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AE1 --- HSIO171NB0/DQS Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AE2 --- HSIO171PB0/DQS/CCC_NW_PLL1_OUT0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AE3 --- HSIO172PB0/CCC_NW_CLKIN_N_1 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AE4 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
AE5 --- HSIO173PB0/CCC_NW_CLKIN_N_0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AE6 R_DATA[1] HSIO160NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[1]
|
|
AE7 R_DATA[23] HSIO157PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[23]
|
|
AE8 R_DATA[19] HSIO156PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[19]
|
|
AE9 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AE10 R_DATA[20] HSIO152NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[20]
|
|
AE11 R_DATA[24] HSIO150PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[24]
|
|
AE12 R_DATA[30] HSIO155PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[30]
|
|
AE13 R_DATA[29] HSIO153PB0/DQS Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[29]
|
|
AE14 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
AE15 --- HSIO131NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AE16 --- HSIO129PB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AE17 --- HSIO127NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AE18 --- HSIO117NB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AE19 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AE20 --- HSIO116PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AE21 --- HSIO114NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AE22 --- HSIO87NB1/DQS Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AE23 --- HSIO85PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AE24 --- VDDI1 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI1 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm)
|
|
AE25 --- HSIO84PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AE26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AE27 --- XCVR_2A_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
AE28 --- XCVR_2A_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
AE29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
AE30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AE31 --- XCVR_2_TX1_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AE32 --- XCVR_2_TX1_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AE33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AE34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AF1 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
AF2 --- HSIO169PB0/CCC_NW_PLL1_OUT1 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AF3 --- HSIO169NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AF4 --- HSIO172NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AF5 --- HSIO173NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AF6 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AF7 R_DATA[16] HSIO157NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[16]
|
|
AF8 R_DATA[28] HSIO156NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[28]
|
|
AF9 R_DATA[0] HSIO158PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[0]
|
|
AF10 R_DATA[25] HSIO154NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[25]
|
|
AF11 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
AF12 R_DATA[26] HSIO155NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[26]
|
|
AF13 R_DATA[22] HSIO153NB0/DQS Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[22]
|
|
AF14 --- HSIO130PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AF15 --- HSIO128PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AF16 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AF17 --- HSIO126PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AF18 --- HSIO115NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AF19 --- HSIO115PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AF20 --- HSIO118PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AF21 --- VDDI1 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI1 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm)
|
|
AF22 --- HSIO87PB1/DQS Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AF23 --- HSIO88NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AF24 --- HSIO86PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AF25 --- HSIO86NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AF26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AF27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
AF28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AF29 --- XCVR_2B_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
AF30 --- XCVR_2B_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
AF31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AF32 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AF33 --- XCVR_2_TX2_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AF34 --- XCVR_2_TX2_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AG1 --- HSIO168PB0/CLKIN_N_3/CCC_NW_CLKIN_N_3 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AG2 --- HSIO168NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AG3 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AG4 --- HSIO170PB0/CLKIN_N_2/CCC_NW_CLKIN_N_2/CCC_NW_PLL1_OUT0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AG5 --- HSIO170NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AG6 R_DATA[13] HSIO159NB0/DQS Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[13]
|
|
AG7 R_DATA[11] HSIO159PB0/DQS Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[11]
|
|
AG8 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
AG9 R_DATA[12] HSIO158NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[12]
|
|
AG10 R_DATA[18] HSIO154PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[18]
|
|
AG11 --- HSIO137PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AG12 --- HSIO136PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AG13 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AG14 --- HSIO130NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AG15 --- HSIO128NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AG16 --- HSIO126NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AG17 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AG18 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm)
|
|
AG19 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AG20 --- HSIO118NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AG21 --- HSIO100PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AG22 --- HSIO88PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AG23 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AG24 --- HSIO78PB1/CLKIN_N_9/CCC_NE_CLKIN_N_9 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AG25 --- HSIO78NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AG26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AG27 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
AG28 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
AG29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
AG30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AG31 --- XCVR_2_RX2_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AG32 --- XCVR_2_RX2_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AG33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AG34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AH1 --- HSIO166PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AH2 R_DATA[10] HSIO166NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[10]
|
|
AH3 --- HSIO167PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AH4 R_DATA[7] HSIO163PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[7]
|
|
AH5 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
AH6 --- HSIO149PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AH7 --- HSIO149NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AH8 --- HSIO146PB0/CLKIN_N_4 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AH9 --- HSIO146NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AH10 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AH11 --- HSIO137NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AH12 --- HSIO136NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AH13 --- HSIO135NB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AH14 --- HSIO135PB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AH15 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm)
|
|
AH16 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AH17 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AH18 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AH19 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AH20 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AH21 --- HSIO100NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AH22 --- HSIO99PB1/DQS Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AH23 --- HSIO79PB1/CCC_NE_PLL1_OUT1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AH24 --- HSIO80PB1/CLKIN_N_8/CCC_NE_CLKIN_N_8/CCC_NE_PLL1_OUT0 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AH25 --- HSIO80NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AH26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AH27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
AH28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AH29 --- XCVR_2_RX3_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AH30 --- XCVR_2_RX3_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AH31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AH32 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
AH33 --- XCVR_2_TX3_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AH34 --- XCVR_2_TX3_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AJ1 R_DATA[6] HSIO164PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[6]
|
|
AJ2 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
AJ3 --- HSIO167NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AJ4 R_DATA[15] HSIO163NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[15]
|
|
AJ5 --- HSIO147PB0/DQS Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AJ6 --- HSIO147NB0/DQS Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AJ7 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AJ8 --- HSIO148NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AJ9 --- HSIO148PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AJ10 --- HSIO134PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AJ11 --- HSIO134NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AJ12 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm)
|
|
AJ13 --- HSIO133NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AJ14 --- HSIO133PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AJ15 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AJ16 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AJ17 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AJ18 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AJ19 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AJ20 --- HSIO98PB1/CLKIN_N_6 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AJ21 --- HSIO99NB1/DQS Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AJ22 --- VDDI1 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI1 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm)
|
|
AJ23 --- HSIO79NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AJ24 --- HSIO81PB1/DQS/CCC_NE_PLL1_OUT0 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AJ25 --- HSIO81NB1/DQS Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AJ26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AJ27 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
AJ28 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
AJ29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
AJ30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AJ31 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AJ32 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AJ33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AJ34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AK1 R_DATA[3] HSIO164NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[3]
|
|
AK2 R_DATA[14] HSIO162PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[14]
|
|
AK3 R_DATA[8] HSIO165PB0/DQS Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[8]
|
|
AK4 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AK5 --- HSIO145PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AK6 --- HSIO145NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AK7 --- HSIO144PB0/CLKIN_N_5 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AK8 --- HSIO144NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AK9 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm)
|
|
AK10 --- HSIO125PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AK11 --- HSIO122PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AK12 --- HSIO132NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AK13 --- HSIO132PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AK14 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AK15 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AK16 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AK17 --- HSIO107PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AK18 --- HSIO107NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AK19 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm)
|
|
AK20 --- HSIO98NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AK21 --- HSIO97PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AK22 --- HSIO97NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AK23 --- HSIO82PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AK24 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AK25 --- HSIO77PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AK26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AK27 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AK28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AK29 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AK30 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AK31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AK32 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AK33 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AK34 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AL1 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AL2 R_DATA[2] HSIO162NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[2]
|
|
AL3 --- HSIO165NB0/DQS Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL4 --- HSIO141PB0/DQS Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL5 --- HSIO139PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL6 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
AL7 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL8 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL9 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL10 --- HSIO125NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL11 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AL12 --- HSIO122NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL13 --- HSIO112PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL14 --- HSIO113NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL15 --- HSIO113PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL16 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm)
|
|
AL17 --- HSIO103PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL18 --- HSIO105PB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL19 --- HSIO105NB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL20 --- HSIO101PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL21 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AL22 --- HSIO82NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL23 --- HSIO83PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL24 --- HSIO83NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL25 --- HSIO77NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL26 --- HSIO72PB1/CCC_NE_CLKIN_N_11 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL27 --- HSIO72NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AL28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AL29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
AL30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AL31 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AL32 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AL33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AL34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AM1 --- HSIO143PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM2 --- HSIO143NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM3 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
AM4 --- HSIO141NB0/DQS Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM5 --- HSIO139NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM6 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM7 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM8 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AM9 --- HSIO124PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM10 --- HSIO124NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM11 --- HSIO123PB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM12 --- HSIO112NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM13 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm)
|
|
AM14 --- HSIO110PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM15 --- HSIO110NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM16 --- HSIO103NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM17 --- HSIO106PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM18 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AM19 --- HSIO101NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM20 --- HSIO96PB1/CLKIN_N_7 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM21 --- HSIO96NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM22 --- HSIO95PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM23 --- VDDI1 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI1 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm)
|
|
AM24 --- HSIO91NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM25 --- HSIO74PB1/CCC_NE_CLKIN_N_10/CCC_NE_PLL0_OUT0 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM26 --- HSIO74NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM27 --- HSIO73NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AM28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AM29 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AM30 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AM31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AM32 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
AM33 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AM34 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AN1 --- HSIO142PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN2 --- HSIO142NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN3 --- HSIO138PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN4 --- HSIO138NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN5 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AN6 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN7 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN8 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN9 --- HSIO121PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN10 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm)
|
|
AN11 --- HSIO123NB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN12 --- HSIO111PB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN13 --- HSIO111NB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN14 --- HSIO108PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN15 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AN16 --- HSIO104PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN17 --- HSIO106NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN18 --- HSIO102PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN19 --- HSIO94PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN20 --- VDDI1 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI1 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm)
|
|
AN21 --- HSIO90PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN22 --- HSIO90NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN23 --- HSIO95NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN24 --- HSIO91PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN25 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AN26 --- HSIO76NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN27 --- HSIO73PB1/CCC_NE_PLL0_OUT1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AN28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AN29 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AN30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AN31 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AN32 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AN33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AN34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AP2 --- HSIO140PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP3 --- HSIO140NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP4 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP5 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP6 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP7 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm)
|
|
AP8 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP9 --- HSIO121NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP10 --- HSIO120PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP11 --- HSIO120NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP12 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AP13 --- HSIO109PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP14 --- HSIO109NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP15 --- HSIO108NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP16 --- HSIO104NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP17 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm)
|
|
AP18 --- HSIO102NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP19 --- HSIO94NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP20 --- HSIO92PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP21 --- HSIO92NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP22 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AP23 --- HSIO93PB1/DQS Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP24 --- HSIO93NB1/DQS Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP25 --- HSIO76PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP26 --- HSIO75PB1/DQS/CCC_NE_PLL0_OUT0 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP27 --- HSIO75NB1/DQS Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
AP28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AP29 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AP30 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
AP31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AP32 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
AP33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
B1 --- GPIO250NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
B2 --- GPIO252NB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
B3 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v
|
|
B4 --- GPIO253PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
B5 --- GPIO255PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
B6 --- GPIO17NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
B7 --- GPIO12NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
B8 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
B9 --- GPIO25PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
B10 --- GPIO28PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
B11 --- GPIO29NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
B12 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
B13 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
B14 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
B15 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
B16 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
B17 --- HSIO43NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
B18 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
B19 --- HSIO46PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
B20 --- HSIO47PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
B21 --- HSIO49NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
B22 --- HSIO50NB6/DQS Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
B23 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
B24 --- HSIO66PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
B25 --- HSIO68NB6/DQS Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
B26 --- HSIO71NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
B27 --- HSIO69NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
B28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
B29 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
B30 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
B31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
B32 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
B33 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
B34 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
C1 --- GPIO250PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
C2 --- GPIO252PB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
C3 --- GPIO254PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
C4 --- GPIO254NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
C5 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
C6 --- GPIO17PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
C7 --- GPIO12PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
C8 --- GPIO14NB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
C9 --- GPIO24NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
C10 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v
|
|
C11 --- GPIO29PB2/CLKIN_S_9/CCC_SE_CLKIN_S_9 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
C12 --- GPIO27NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
C13 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
C14 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
C15 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
C16 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
C17 --- HSIO43PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
C18 --- HSIO45PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
C19 --- HSIO45NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
C20 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
C21 --- HSIO49PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
C22 --- HSIO50PB6/DQS Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
C23 --- HSIO52NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
C24 --- HSIO67NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
C25 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
C26 --- HSIO70NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
C27 --- HSIO71PB6/CCC_SE_CLKIN_S_15 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
C28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
C29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
C30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
C31 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
C32 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
C33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
C34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
D1 --- GPIO245NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
D2 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
D3 --- GPIO248PB2/CCC_SW_PLL1_OUT1 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
D4 --- GPIO248NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
D5 --- GPIO249PB2/CLKIN_S_3/CCC_SW_CLKIN_S_3 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
D6 --- GPIO13NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
D7 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v
|
|
D8 --- GPIO14PB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
D9 --- GPIO24PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
D10 --- GPIO26PB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
D11 --- GPIO26NB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
D12 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
D13 --- GPIO27PB2/CLKIN_S_8/CCC_SE_CLKIN_S_8 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
D14 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
D15 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
D16 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
D17 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
D18 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
D19 --- HSIO42PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
D20 --- HSIO42NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
D21 --- HSIO48NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
D22 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
D23 --- HSIO52PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
D24 --- HSIO67PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
D25 LINK_OK HSIO70PB6/CCC_SE_PLL1_OUT1 Bank6 Fixed LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF LINK_OK
|
|
D26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
D27 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
D28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
D29 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
D30 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
D31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
D32 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
D33 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
D34 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
E1 --- GPIO245PB2/CCC_SW_CLKIN_S_1 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
E2 --- GPIO246NB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
E3 --- GPIO247NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
E4 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v
|
|
E5 --- GPIO249NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
E6 --- GPIO13PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
E7 --- GPIO15PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
E8 --- GPIO15NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
E9 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
E10 --- GPIO20PB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
E11 --- GPIO20NB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
E12 --- GPIO23NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
E13 --- GPIO22NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
E14 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v
|
|
E15 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
E16 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
E17 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
E18 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
E19 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
E20 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
E21 --- HSIO48PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
E22 --- HSIO51PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
E23 --- HSIO51NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
E24 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
E25 REF_CLK_0 HSIO63PB6/CLKIN_S_12/CCC_SE_CLKIN_S_12/CCC_SE_PLL0_OUT0 Bank6 Fixed LVCMOS18 Input None No ON Up No OFF --- OFF 120 OFF --- --- --- --- --- --- REF_CLK_0
|
|
E26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
E27 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
E28 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
E29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
E30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
E31 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
E32 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
E33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
E34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
F1 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v
|
|
F2 --- GPIO246PB2/DQS/CCC_SW_PLL1_OUT0 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
F3 --- GPIO247PB2/CLKIN_S_2/CCC_SW_CLKIN_S_2/CCC_SW_PLL1_OUT0 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
F4 --- GPIO244NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
F5 --- GPIO11NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
F6 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
F7 --- GPIO9NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
F8 --- GPIO9PB2/CLKIN_S_6 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
F9 --- GPIO6NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
F10 --- GPIO21NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
F11 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v
|
|
F12 --- GPIO23PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
F13 --- GPIO22PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
F14 --- GPIO19PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
F15 --- GPIO19NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
F16 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
F17 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
F18 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
F19 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
F20 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
F21 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
F22 RD_BC_ERROR HSIO64NB6 Bank6 Fixed LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF RD_BC_ERROR
|
|
F23 --- HSIO62PB6/DQS/CCC_SE_PLL0_OUT0 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
F24 --- HSIO62NB6/DQS Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
F25 --- HSIO63NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
F26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
F27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
F28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
F29 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
F30 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
F31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
F32 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
F33 --- XCVR_3_TX0_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
F34 --- XCVR_3_TX0_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
G1 --- GPIO243NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
G2 --- GPIO243PB5/CLKIN_W_0/CCC_SW_CLKIN_W_0 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
G3 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
G4 --- GPIO244PB2/CCC_SW_CLKIN_S_0 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
G5 --- GPIO11PB2/CLKIN_S_7 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
G6 --- GPIO10NB2/LPRB_B Bank2 User Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Probe B
|
|
G7 --- GPIO8NB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
G8 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v
|
|
G9 --- GPIO6PB2/CLKIN_S_4 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
G10 --- GPIO21PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
G11 --- GPIO18NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
G12 --- GPIO18PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
G13 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
G14 --- GPIO3NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
G15 --- GPIO5PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
G16 --- GPIO5NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
G17 TX HSIO37NB6 Bank6 Fixed LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF TX
|
|
G18 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
G19 --- HSIO39NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
G20 --- HSIO41PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
G21 --- HSIO41NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
G22 --- HSIO64PB6/CCC_SE_PLL0_OUT1 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
G23 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
G24 --- HSIO61PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
G25 --- HSIO65NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
G26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
G27 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
G28 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
G29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
G30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
G31 --- XCVR_3_RX0_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
G32 --- XCVR_3_RX0_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
G33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
G34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
H1 --- GPIO240NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
H2 --- GPIO240PB5/CLKIN_W_1/CCC_SW_CLKIN_W_1 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
H3 --- GPIO242NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
H4 --- GPIO242PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
H5 --- VDDI5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI5 directly to 1.2v/1.5v/1.8v/2.5v/3.3v, or to VSS through resistor (10K ohm)
|
|
H6 --- GPIO10PB2/LPRB_A Bank2 User Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Probe A
|
|
H7 --- GPIO8PB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
H8 --- GPIO7NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
H9 --- GPIO7PB2/CLKIN_S_5 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
H10 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
H11 --- GPIO4NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
H12 --- GPIO1NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
H13 --- GPIO1PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
H14 --- GPIO3PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
H15 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v
|
|
H16 --- GPIO32PB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
H17 --- GPIO32NB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
H18 RX HSIO37PB6 Bank6 Fixed LVCMOS18 Input None No ON Up No OFF --- OFF 120 OFF --- --- --- --- --- --- RX
|
|
H19 --- HSIO39PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
H20 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
H21 --- HSIO36NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
H22 --- HSIO60NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
H23 --- HSIO60PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
H24 --- HSIO61NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
H25 --- HSIO65PB6/CLKIN_S_13/CCC_SE_CLKIN_S_13 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
H26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
H27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
H28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
H29 --- XCVR_3C_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
H30 --- XCVR_3C_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
H31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
H32 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
H33 --- XCVR_3_TX1_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
H34 --- XCVR_3_TX1_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
J1 --- GPIO239PB5/CLKIN_W_2/CCC_SW_CLKIN_W_2/CCC_SW_PLL0_OUT0 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
J2 --- VDDI5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI5 directly to 1.2v/1.5v/1.8v/2.5v/3.3v, or to VSS through resistor (10K ohm)
|
|
J3 --- GPIO241NB5/DQS Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
J4 --- GPIO241PB5/DQS/CCC_SW_PLL0_OUT0 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
J5 --- GPIO235NB5/DQS Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
J6 --- GPIO235PB5/DQS Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
J7 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
J8 --- GPIO237PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
J9 TMS TMS --- Dedicated --- Input --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- TMS
|
|
J10 TCK TCK --- Dedicated --- Input --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- TCK
|
|
J11 --- GPIO4PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
J12 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v
|
|
J13 --- GPIO2NB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
J14 --- GPIO2PB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
J15 --- GPIO0NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
J16 --- GPIO31PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
J17 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
J18 --- GPIO33PB2/CCC_SE_CLKIN_S_10 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
J19 --- GPIO33NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
J20 SPISS HSIO36PB6 Bank6 Fixed LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF SPISS
|
|
J21 --- HSIO38PB6/DQS Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
J22 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
J23 --- HSIO57PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
J24 --- HSIO57NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
J25 --- HSIO59PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
J26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
J27 --- XCVR_3A_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
J28 --- XCVR_3A_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
J29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
J30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
J31 --- XCVR_3_RX1_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
J32 --- XCVR_3_RX1_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
J33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
J34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
K1 --- GPIO239NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
K2 --- GPIO238PB5/CCC_SW_PLL0_OUT1 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
K3 --- GPIO238NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
K4 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
K5 --- GPIO232PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
K6 --- GPIO233NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
K7 --- GPIO233PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
K8 --- GPIO237NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
K9 TDO TDO --- Dedicated --- Output --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- TDO
|
|
K10 --- SDO --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, SDO is High-Z when the SPI interface is idle - it is only enabled when the SPI controller is outputting data, CLAMP=OFF
|
|
K11 TDI TDI --- Dedicated --- Input --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- TDI
|
|
K12 --- SDI --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect to VDDI3 through resistor (10K ohm), CLAMP=OFF
|
|
K13 --- RESERVED --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: Must connect to VDDI3 through resistor (10K ohm). All other applications: DNC is acceptable, CLAMP=OFF
|
|
K14 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
K15 --- GPIO0PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
K16 --- GPIO31NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
K17 --- GPIO35NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
K18 --- GPIO35PB2/CCC_SE_CLKIN_S_11 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
K19 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v
|
|
K20 SPISDO HSIO40PB6 Bank6 Fixed LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF SPISDO
|
|
K21 SPISCLKO HSIO38NB6/DQS Bank6 Fixed LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF SPISCLKO
|
|
K22 RESET_N HSIO55PB6 Bank6 Fixed LVCMOS18 Input None No ON Up No OFF --- OFF 120 OFF --- --- --- --- --- --- RESET_N
|
|
K23 --- HSIO54PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
K24 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
K25 --- HSIO59NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
K26 --- XCVR_VREF --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect to VSS through resistor (10K ohm)
|
|
K27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
K28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
K29 --- XCVR_3_RX2_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
K30 --- XCVR_3_RX2_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
K31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
K32 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
K33 --- XCVR_3_TX2_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
K34 --- XCVR_3_TX2_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
L1 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
L2 --- GPIO223NB5/DQS Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
L3 --- GPIO223PB5/DQS Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
L4 --- GPIO225PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
L5 --- GPIO232NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
L6 --- VDDI5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI5 directly to 1.2v/1.5v/1.8v/2.5v/3.3v, or to VSS through resistor (10K ohm)
|
|
L7 --- GPIO236NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
L8 --- GPIO236PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
L9 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
L10 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
L11 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
L12 --- IO_CFG_INTF --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect to VSS through resistor (10K ohm), CLAMP=OFF
|
|
L13 --- SPI_EN --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect to VSS through resistor (10K ohm), CLAMP=OFF
|
|
L14 --- SCK --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect to VSS through resistor (10K ohm), CLAMP=OFF
|
|
L15 --- DEVRST_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect to VDDI3 through 1k ohm resistor (not to be shared with any other pins), CLAMP=OFF
|
|
L16 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v
|
|
L17 --- GPIO30PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
L18 --- GPIO34NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
L19 --- GPIO34PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
L20 SPISDI HSIO40NB6 Bank6 Fixed LVCMOS18 Input None No ON Up No OFF --- OFF 120 OFF --- --- --- --- --- --- SPISDI
|
|
L21 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
L22 --- HSIO55NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
L23 --- HSIO54NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
L24 --- HSIO58NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
L25 --- HSIO58PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
L26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
L27 --- XCVR_1C_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
L28 --- XCVR_1C_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
L29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
L30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
L31 --- XCVR_3_RX3_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
L32 --- XCVR_3_RX3_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
L33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
L34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
M1 --- GPIO221NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
M2 --- GPIO221PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
M3 --- VDDI5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI5 directly to 1.2v/1.5v/1.8v/2.5v/3.3v, or to VSS through resistor (10K ohm)
|
|
M4 --- GPIO225NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
M5 --- GPIO234NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
M6 --- GPIO234PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
M7 --- GPIO231NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
M8 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
M9 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
M10 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
M11 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
M12 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
M13 --- VDDI5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI5 directly to 1.2v/1.5v/1.8v/2.5v/3.3v, or to VSS through resistor (10K ohm)
|
|
M14 --- SS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect to VSS through resistor (10K ohm), CLAMP=OFF
|
|
M15 --- VDD25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD25 to 2.5v
|
|
M16 --- VDDAUX2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDAUX2 directly to 2.5v/3.3v, or to VSS through resistor (10K ohm)
|
|
M17 --- GPIO30NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
M18 --- VDDAUX2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDAUX2 directly to 2.5v/3.3v, or to VSS through resistor (10K ohm)
|
|
M19 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
M20 --- VDDAUX2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDAUX2 directly to 2.5v/3.3v, or to VSS through resistor (10K ohm)
|
|
M21 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
M22 --- HSIO56PB6/DQS Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
M23 --- HSIO56NB6/DQS Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON
|
|
M24 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v
|
|
M25 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v
|
|
M26 --- XCVR_VREF --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect to VSS through resistor (10K ohm)
|
|
M27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
M28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
M29 --- XCVR_1_RX0_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
M30 --- XCVR_1_RX0_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
M31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
M32 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
M33 --- XCVR_3_TX3_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
M34 --- XCVR_3_TX3_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
N1 --- GPIO220NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
N2 --- GPIO220PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
N3 --- GPIO224NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
N4 --- GPIO224PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
N5 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
N6 --- GPIO228NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
N7 --- GPIO228PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
N8 --- GPIO231PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
N9 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
N10 --- VDDI5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI5 directly to 1.2v/1.5v/1.8v/2.5v/3.3v, or to VSS through resistor (10K ohm)
|
|
N11 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
N12 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
N13 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
N14 TRSTB TRSTB --- Dedicated --- Input --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- TRSTB
|
|
N15 --- VDDAUX5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDAUX5 directly to 2.5v/3.3v, or to VSS through resistor (10K ohm)
|
|
N16 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
N17 --- VDDAUX2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDAUX2 directly to 2.5v/3.3v, or to VSS through resistor (10K ohm)
|
|
N18 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
N19 --- VDDAUX2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDAUX2 directly to 2.5v/3.3v, or to VSS through resistor (10K ohm)
|
|
N20 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
N21 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v
|
|
N22 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
N23 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v
|
|
N24 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
N25 --- VDD_XCVR_CLK --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD_XCVR_CLK directly to 2.5v/3.3v when VDDA is connected to 1.0V/1.05V. If VDDA is connected to VSS, VDD_XCVR_CLK must connect to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDD_XCVR_CLK to VSS through resistor (10k ohm)
|
|
N26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
N27 --- XCVR_1A_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
N28 --- XCVR_1A_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
N29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
N30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
N31 --- XCVR_1_TX0_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
N32 --- XCVR_1_TX0_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
N33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
N34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
P1 --- GPIO211PB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
P2 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
P3 --- GPIO222NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
P4 --- GPIO222PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
P5 --- GPIO229NB5/DQS Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
P6 --- GPIO229PB5/DQS Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
P7 --- VDDI5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI5 directly to 1.2v/1.5v/1.8v/2.5v/3.3v, or to VSS through resistor (10K ohm)
|
|
P8 --- GPIO230NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
P9 --- GPIO230PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
P10 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
P11 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
P12 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
P13 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
P14 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
P15 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
P16 --- VDDAUX5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDAUX5 directly to 2.5v/3.3v, or to VSS through resistor (10K ohm)
|
|
P17 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
P18 --- VDDI3 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI3 to 1.8v/2.5v/3.3v
|
|
P19 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
P20 --- VDDI3 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI3 to 1.8v/2.5v/3.3v
|
|
P21 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
P22 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
P23 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
P24 --- VDD25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD25 to 2.5v
|
|
P25 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
P26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
P27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
P28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
P29 --- XCVR_1_RX1_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
P30 --- XCVR_1_RX1_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
P31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
P32 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
P33 --- XCVR_1_TX1_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
P34 --- XCVR_1_TX1_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
R1 --- GPIO211NB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
R2 --- GPIO213NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
R3 --- GPIO213PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
R4 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v
|
|
R5 --- GPIO227PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
R6 --- GPIO227NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
R7 --- GPIO226PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
R8 --- GPIO226NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
R9 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
R10 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
R11 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
R12 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
R13 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
R14 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
R15 --- VDDI5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI5 directly to 1.2v/1.5v/1.8v/2.5v/3.3v, or to VSS through resistor (10K ohm)
|
|
R16 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
R17 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
R18 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
R19 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
R20 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
R21 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
R22 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
R23 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
R24 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
R25 --- VDDA25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA25 directly to 2.5v or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDD25A to VSS through resistor (10K ohm)
|
|
R26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
R27 --- XCVR_1B_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
R28 --- XCVR_1B_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
R29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
R30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
R31 --- XCVR_1_RX2_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
R32 --- XCVR_1_RX2_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
R33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
R34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
T1 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v
|
|
T2 --- GPIO209NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
T3 --- GPIO209PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
T4 --- GPIO217NB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
T5 --- GPIO217PB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
T6 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
T7 --- GPIO218PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
T8 --- GPIO219NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
T9 --- GPIO219PB4/CLKIN_W_3/CCC_SW_CLKIN_W_3 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
T10 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
T11 --- VDDI5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI5 directly to 1.2v/1.5v/1.8v/2.5v/3.3v, or to VSS through resistor (10K ohm)
|
|
T12 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
T13 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
T14 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
T15 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
T16 --- VDDAUX5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDAUX5 directly to 2.5v/3.3v, or to VSS through resistor (10K ohm)
|
|
T17 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
T18 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
T19 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
T20 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
T21 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
T22 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
T23 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
T24 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
T25 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
T26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
T27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
T28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
T29 --- XCVR_1_RX3_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
T30 --- XCVR_1_RX3_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
T31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
T32 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
T33 --- XCVR_1_TX2_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
T34 --- XCVR_1_TX2_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
U1 RX_N GPIO212NB4 Bank4 Fixed LVDS25 Input None No ON None No OFF MID ON 100 OFF --- --- --- --- --- --- RX_N
|
|
U2 RX_P GPIO212PB4 Bank4 Fixed LVDS25 Input None No ON None No OFF MID ON 100 OFF --- --- --- --- --- --- RX_P
|
|
U3 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
U4 REFCLK_P GPIO215PB4/CLKIN_W_5/CCC_NW_CLKIN_W_5 Bank4 Fixed LVDS25 Input None No ON None No OFF MID ON 100 OFF --- --- --- --- --- --- REFCLK_P
|
|
U5 REFCLK_N GPIO215NB4 Bank4 Fixed LVDS25 Input None No ON None No OFF MID ON 100 OFF --- --- --- --- --- --- REFCLK_N
|
|
U6 --- GPIO214PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
U7 --- GPIO218NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
U8 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v
|
|
U9 --- GPIO216NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
U10 --- GPIO216PB4/CLKIN_W_4/CCC_NW_CLKIN_W_4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
U11 PHY_RST GPIO206NB4 Bank4 Fixed LVCMOS25 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF PHY_RST
|
|
U12 coma_mode GPIO206PB4 Bank4 Fixed LVCMOS25 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF coma_mode
|
|
U13 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
U14 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
U15 --- VDDAUX5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDAUX5 directly to 2.5v/3.3v, or to VSS through resistor (10K ohm)
|
|
U16 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
U17 --- VDD25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD25 to 2.5v
|
|
U18 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
U19 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
U20 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
U21 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
U22 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
U23 --- VDD25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD25 to 2.5v
|
|
U24 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
U25 --- VDDA25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA25 directly to 2.5v or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDD25A to VSS through resistor (10K ohm)
|
|
U26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
U27 --- XCVR_0C_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
U28 --- XCVR_0C_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
U29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
U30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
U31 --- XCVR_1_TX3_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
U32 --- XCVR_1_TX3_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
U33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
U34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
V1 TX_P GPIO210PB4 Bank4 Fixed LVDS25 Output None No ON None No --- --- --- 100 --- OFF 6 --- 5 OFF OFF TX_P
|
|
V2 TX_N GPIO210NB4 Bank4 Fixed LVDS25 Output None No ON None No --- --- --- 100 --- OFF 6 --- 5 OFF OFF TX_N
|
|
V3 --- GPIO208PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
V4 --- GPIO208NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
V5 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v
|
|
V6 --- GPIO214NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
V7 --- GPIO198NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
V8 --- GPIO198PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
V9 --- GPIO201PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
V10 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
V11 --- GPIO205NB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
V12 --- GPIO205PB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
V13 --- GPIO203PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
V14 --- GPIO207PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
V15 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v
|
|
V16 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
V17 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
V18 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
V19 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
V20 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
V21 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
V22 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
V23 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
V24 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
V25 --- VDD_XCVR_CLK --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD_XCVR_CLK directly to 2.5v/3.3v when VDDA is connected to 1.0V/1.05V. If VDDA is connected to VSS, VDD_XCVR_CLK must connect to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDD_XCVR_CLK to VSS through resistor (10k ohm)
|
|
V26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
V27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
V28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
V29 --- XCVR_0_RX0_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
V30 --- XCVR_0_RX0_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
V31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
V32 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
V33 --- XCVR_0_TX0_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
V34 --- XCVR_0_TX0_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
W1 --- GPIO194PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
W2 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v
|
|
W3 --- GPIO193NB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
W4 --- GPIO193PB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
W5 --- GPIO195PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
W6 --- GPIO197PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
W7 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
W8 --- GPIO199PB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
W9 --- GPIO201NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
W10 --- GPIO200PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
W11 --- GPIO202PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
W12 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v
|
|
W13 --- GPIO203NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
W14 --- GPIO207NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
W15 --- VDDAUX4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v
|
|
W16 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
W17 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
W18 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
W19 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
W20 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
W21 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
W22 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
W23 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
W24 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
W25 --- VDDA25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA25 directly to 2.5v or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDD25A to VSS through resistor (10K ohm)
|
|
W26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
W27 --- XCVR_0A_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
W28 --- XCVR_0A_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF
|
|
W29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
W30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
W31 --- XCVR_0_RX1_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
W32 --- XCVR_0_RX1_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
W33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
W34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
Y1 --- GPIO194NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
Y2 --- GPIO192NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
Y3 --- GPIO192PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
Y4 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
Y5 --- GPIO195NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
Y6 --- GPIO197NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
Y7 --- GPIO196PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
Y8 --- GPIO199NB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
Y9 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v
|
|
Y10 --- GPIO200NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
Y11 --- GPIO202NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF
|
|
Y12 PHY_MDC GPIO204PB4 Bank4 Fixed LVCMOS25 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF PHY_MDC
|
|
Y13 PHY_MDIO GPIO204NB4 Bank4 Fixed LVCMOS25 Inout None No ON Up No OFF --- OFF 120 OFF OFF 8 --- 5 --- OFF PHY_MDIO
|
|
Y14 --- VDDAUX4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v
|
|
Y15 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
Y16 --- VDDAUX4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v
|
|
Y17 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
Y18 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
Y19 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
Y20 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
Y21 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
Y22 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
Y23 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
Y24 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v
|
|
Y25 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
Y26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
Y27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
Y28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
Y29 --- XCVR_0_RX2_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
Y30 --- XCVR_0_RX2_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
Y31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS
|
|
Y32 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm)
|
|
Y33 --- XCVR_0_TX1_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
Y34 --- XCVR_0_TX1_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined
|
|
|
|
|
|
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
|
|
-"DNC" Do Not Connect, reserved, leave floating. These pins are physically connected to the die. But the designer must leave floating to avoid unwanted leakages.
|
|
-"NC" No Connection - No connection to die. These pins can be used for board level signal routing by the designer if needed when migrating designs to larger devices in the same package.
|
|
-"Vref" The pin is set as a VREF pin
|
|
-"Probe A" Programmed as output for probeA
|
|
-"Probe B" Programmed as output for probeB
|
|
-"Due to Probe" Probe is on, therefore bank voltage must be 2.5V or 3.3V
|
|
-"Open Drain" Tribuff IOs where the D is connected to 0 and the E is routed.
|
|
-* Libero configures unused User IO (GPIO, HSIO) as: Input Buffer Disabled, Output Buffer Tristated, Weak Pull-up.
|
|
-** Even if the IO bank is not being used, users must connect this VDDIx and VDDAUXx to a rail that meets the specifications of this IO bank.See "Polarfire and PolarFire SoC FPGA Power-up and Resets User Guide" for a detailed explanation.
|
|
-*** Tie-offs to VSS can be ganged to a single 10K Ohm resistor. User can also add more 10K Ohm resistors if it eases board level routing.
|
|
-**** XCVR_RX tie-offs to VSS can be ganged to an appropriately sized single 100K Ohm resistor to ease board level routing. Each XCVR_RX draws approximately 10uA.
|
|
-***** Package Parasitics : Only digital IOs balls have individual and complete parasitic values. Power Parasitics are lumped together and will be reported only on one power ball line per power type. VSS does not have parasitic values because it is used as return path.
|
|
-****** The embedded PCIe controller subsystem (PCIESS) is available only within Quad_0 "XCVR_0" Lanes. See User Guide "PolarFire FPGA and PolarFire SoC FPGA PCI Express" for more information on the embedded PCIE capabilities and its usage.
|
|
-******* Preferred clock connectivity should be referenced in "PolarFire FPGA and PolarFire SoC FPGA Clocking Resources User Guide" before completion of PCB design.
|
|
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
|