---------------------------------------------------------------- -Report version: 0.1 -Pin Report - Date: Wed Apr 15 23:06:21 2026 Pinchecksum: NOT-AVAILABLE -Product: Designer -Release: 2025.1 -Version: 2025.1.0.14 -Design Name: top -Family: PolarFire -Die: MPF300TS -Package: FCG1152 ----------------------------------------------------------------- Pin |Port |Function |Bank |State |I/O Std |Direction |Used I/O Reg |User I/O Lock Down |Clamp Diode |Resistor Pull |Use I/O Calibration from the lane |Schmitt Trigger |Vcm Input Range |On Die Termination |Odt Value (Ohm) |Input Delay |Slew |Output Drive (mA) |Impedance (ohm) |Output Load (pF) |Source Termination (Ohm) |Output Delay |Board Layout | -----|------------|--------------------------------------------------------|------|--------------|---------|----------|-------------|-------------------|------------|--------------|----------------------------------|----------------|----------------|-------------------|----------------|------------|-----|------------------|----------------|-----------------|-------------------------|-------------|--------------------------------------------------------------------------------------------------------------------------------------------------------| A2 --- GPIO251PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF A3 --- GPIO251NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF A4 --- GPIO253NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF A5 --- GPIO255NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF A6 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v A7 --- GPIO16PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF A8 --- GPIO16NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF A9 --- GPIO25NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF A10 --- GPIO28NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF A11 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS A12 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON A13 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON A14 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON A15 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON A16 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v A17 --- HSIO44PB6/DQS Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON A18 --- HSIO44NB6/DQS Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON A19 --- HSIO46NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON A20 --- HSIO47NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON A21 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS A22 --- HSIO53PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON A23 --- HSIO53NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON A24 --- HSIO66NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON A25 --- HSIO68PB6/DQS/CCC_SE_PLL1_OUT0 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON A26 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v A27 --- HSIO69PB6/CCC_SE_CLKIN_S_14/CCC_SE_PLL1_OUT0 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON A28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS A29 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS A30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS A31 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined A32 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined A33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AA1 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AA2 --- GPIO190NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AA3 --- GPIO190PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AA4 --- GPIO191PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AA5 --- GPIO191NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AA6 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v AA7 --- GPIO196NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AA8 --- GPIO183NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AA9 --- GPIO189NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AA10 REF_CLK_SEL GPIO189PB4 Bank4 Fixed LVCMOS25 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF REF_CLK_SEL AA11 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AA12 --- GPIO187NB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AA13 --- GPIO188NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AA14 --- GPIO188PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AA15 --- VDDAUX4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v AA16 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AA17 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v AA18 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AA19 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v AA20 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AA21 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v AA22 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AA23 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v AA24 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AA25 --- VDDA25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA25 directly to 2.5v or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDD25A to VSS through resistor (10K ohm) AA26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AA27 --- XCVR_0B_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF AA28 --- XCVR_0B_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF AA29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) AA30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AA31 --- XCVR_0_TX2_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AA32 --- XCVR_0_TX2_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AA33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AA34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AB1 --- GPIO176NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AB2 --- GPIO176PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AB3 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v AB4 --- GPIO177PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AB5 --- GPIO182PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AB6 --- GPIO179NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AB7 --- GPIO179PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AB8 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AB9 --- GPIO183PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AB10 --- GPIO186NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AB11 --- GPIO186PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AB12 --- GPIO187PB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AB13 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v AB14 --- GPIO185PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AB15 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AB16 --- VDD25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD25 to 2.5v AB17 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AB18 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v AB19 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AB20 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v AB21 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AB22 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v AB23 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v AB24 --- VDD25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD25 to 2.5v AB25 --- VDD_XCVR_CLK --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD_XCVR_CLK directly to 2.5v/3.3v when VDDA is connected to 1.0V/1.05V. If VDDA is connected to VSS, VDD_XCVR_CLK must connect to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDD_XCVR_CLK to VSS through resistor (10k ohm) AB26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AB27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) AB28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AB29 --- XCVR_0_RX3_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AB30 --- XCVR_0_RX3_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AB31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AB32 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AB33 --- XCVR_0_TX3_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AB34 --- XCVR_0_TX3_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AC1 --- GPIO175PB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AC2 --- GPIO174PB4/CLKIN_W_7/CCC_NW_CLKIN_W_7/CCC_NW_PLL0_OUT0 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AC3 --- GPIO177NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AC4 --- GPIO182NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AC5 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AC6 --- GPIO178NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AC7 --- GPIO178PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AC8 --- GPIO181NB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AC9 --- GPIO181PB4/DQS/CCC_NW_PLL0_OUT0 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AC10 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v AC11 --- GPIO184PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AC12 --- GPIO184NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AC13 --- GPIO185NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AC14 --- VDDAUX4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v AC15 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v AC16 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v AC17 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm) AC18 --- HSIO119PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AC19 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v AC20 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm) AC21 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v AC22 --- VDDI1 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI1 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm) AC23 --- HSIO89NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AC24 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v AC25 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AC26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AC27 --- XCVR_2C_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF AC28 --- XCVR_2C_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF AC29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) AC30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AC31 --- XCVR_2_RX0_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AC32 --- XCVR_2_RX0_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AC33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AC34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AD1 --- GPIO175NB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AD2 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AD3 --- GPIO174NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AD4 --- GPIO180PB4/CLKIN_W_6/CCC_NW_CLKIN_W_6/CCC_NW_PLL0_OUT1 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AD5 --- GPIO180NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF AD6 R_DATA[4] HSIO160PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[4] AD7 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v AD8 R_DATA[5] HSIO161NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[5] AD9 R_DATA[9] HSIO161PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[9] AD10 R_DATA[27] HSIO152PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[27] AD11 R_DATA[21] HSIO150NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[21] AD12 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AD13 R_DATA[17] HSIO151PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[17] AD14 R_DATA[31] HSIO151NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[31] AD15 --- HSIO131PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AD16 --- HSIO129NB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AD17 --- HSIO127PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AD18 --- HSIO117PB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AD19 --- HSIO119NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AD20 --- HSIO116NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AD21 --- HSIO114PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AD22 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AD23 --- HSIO85NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AD24 --- HSIO89PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AD25 --- HSIO84NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AD26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AD27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) AD28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AD29 --- XCVR_2_RX1_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AD30 --- XCVR_2_RX1_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AD31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AD32 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) AD33 --- XCVR_2_TX0_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AD34 --- XCVR_2_TX0_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AE1 --- HSIO171NB0/DQS Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AE2 --- HSIO171PB0/DQS/CCC_NW_PLL1_OUT0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AE3 --- HSIO172PB0/CCC_NW_CLKIN_N_1 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AE4 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v AE5 --- HSIO173PB0/CCC_NW_CLKIN_N_0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AE6 R_DATA[1] HSIO160NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[1] AE7 R_DATA[23] HSIO157PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[23] AE8 R_DATA[19] HSIO156PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[19] AE9 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AE10 R_DATA[20] HSIO152NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[20] AE11 R_DATA[24] HSIO150PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[24] AE12 R_DATA[30] HSIO155PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[30] AE13 R_DATA[29] HSIO153PB0/DQS Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[29] AE14 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v AE15 --- HSIO131NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AE16 --- HSIO129PB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AE17 --- HSIO127NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AE18 --- HSIO117NB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AE19 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AE20 --- HSIO116PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AE21 --- HSIO114NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AE22 --- HSIO87NB1/DQS Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AE23 --- HSIO85PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AE24 --- VDDI1 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI1 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm) AE25 --- HSIO84PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AE26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AE27 --- XCVR_2A_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF AE28 --- XCVR_2A_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF AE29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) AE30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AE31 --- XCVR_2_TX1_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AE32 --- XCVR_2_TX1_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AE33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AE34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AF1 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v AF2 --- HSIO169PB0/CCC_NW_PLL1_OUT1 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AF3 --- HSIO169NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AF4 --- HSIO172NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AF5 --- HSIO173NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AF6 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AF7 R_DATA[16] HSIO157NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[16] AF8 R_DATA[28] HSIO156NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[28] AF9 R_DATA[0] HSIO158PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[0] AF10 R_DATA[25] HSIO154NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[25] AF11 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v AF12 R_DATA[26] HSIO155NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[26] AF13 R_DATA[22] HSIO153NB0/DQS Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[22] AF14 --- HSIO130PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AF15 --- HSIO128PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AF16 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AF17 --- HSIO126PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AF18 --- HSIO115NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AF19 --- HSIO115PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AF20 --- HSIO118PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AF21 --- VDDI1 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI1 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm) AF22 --- HSIO87PB1/DQS Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AF23 --- HSIO88NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AF24 --- HSIO86PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AF25 --- HSIO86NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AF26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AF27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) AF28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AF29 --- XCVR_2B_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF AF30 --- XCVR_2B_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF AF31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AF32 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AF33 --- XCVR_2_TX2_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AF34 --- XCVR_2_TX2_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AG1 --- HSIO168PB0/CLKIN_N_3/CCC_NW_CLKIN_N_3 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AG2 --- HSIO168NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AG3 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AG4 --- HSIO170PB0/CLKIN_N_2/CCC_NW_CLKIN_N_2/CCC_NW_PLL1_OUT0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AG5 --- HSIO170NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AG6 R_DATA[13] HSIO159NB0/DQS Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[13] AG7 R_DATA[11] HSIO159PB0/DQS Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[11] AG8 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v AG9 R_DATA[12] HSIO158NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[12] AG10 R_DATA[18] HSIO154PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[18] AG11 --- HSIO137PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AG12 --- HSIO136PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AG13 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AG14 --- HSIO130NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AG15 --- HSIO128NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AG16 --- HSIO126NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AG17 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AG18 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm) AG19 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AG20 --- HSIO118NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AG21 --- HSIO100PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AG22 --- HSIO88PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AG23 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AG24 --- HSIO78PB1/CLKIN_N_9/CCC_NE_CLKIN_N_9 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AG25 --- HSIO78NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AG26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AG27 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF AG28 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF AG29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) AG30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AG31 --- XCVR_2_RX2_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AG32 --- XCVR_2_RX2_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AG33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AG34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AH1 --- HSIO166PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AH2 R_DATA[10] HSIO166NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[10] AH3 --- HSIO167PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AH4 R_DATA[7] HSIO163PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[7] AH5 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v AH6 --- HSIO149PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AH7 --- HSIO149NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AH8 --- HSIO146PB0/CLKIN_N_4 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AH9 --- HSIO146NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AH10 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AH11 --- HSIO137NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AH12 --- HSIO136NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AH13 --- HSIO135NB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AH14 --- HSIO135PB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AH15 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm) AH16 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AH17 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AH18 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AH19 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AH20 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AH21 --- HSIO100NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AH22 --- HSIO99PB1/DQS Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AH23 --- HSIO79PB1/CCC_NE_PLL1_OUT1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AH24 --- HSIO80PB1/CLKIN_N_8/CCC_NE_CLKIN_N_8/CCC_NE_PLL1_OUT0 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AH25 --- HSIO80NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AH26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AH27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) AH28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AH29 --- XCVR_2_RX3_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AH30 --- XCVR_2_RX3_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AH31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AH32 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) AH33 --- XCVR_2_TX3_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AH34 --- XCVR_2_TX3_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AJ1 R_DATA[6] HSIO164PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[6] AJ2 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v AJ3 --- HSIO167NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AJ4 R_DATA[15] HSIO163NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[15] AJ5 --- HSIO147PB0/DQS Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AJ6 --- HSIO147NB0/DQS Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AJ7 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AJ8 --- HSIO148NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AJ9 --- HSIO148PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AJ10 --- HSIO134PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AJ11 --- HSIO134NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AJ12 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm) AJ13 --- HSIO133NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AJ14 --- HSIO133PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AJ15 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AJ16 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AJ17 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AJ18 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AJ19 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AJ20 --- HSIO98PB1/CLKIN_N_6 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AJ21 --- HSIO99NB1/DQS Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AJ22 --- VDDI1 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI1 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm) AJ23 --- HSIO79NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AJ24 --- HSIO81PB1/DQS/CCC_NE_PLL1_OUT0 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AJ25 --- HSIO81NB1/DQS Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AJ26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AJ27 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF AJ28 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF AJ29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) AJ30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AJ31 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AJ32 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AJ33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AJ34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AK1 R_DATA[3] HSIO164NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[3] AK2 R_DATA[14] HSIO162PB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[14] AK3 R_DATA[8] HSIO165PB0/DQS Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[8] AK4 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AK5 --- HSIO145PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AK6 --- HSIO145NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AK7 --- HSIO144PB0/CLKIN_N_5 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AK8 --- HSIO144NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AK9 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm) AK10 --- HSIO125PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AK11 --- HSIO122PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AK12 --- HSIO132NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AK13 --- HSIO132PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AK14 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AK15 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AK16 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AK17 --- HSIO107PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AK18 --- HSIO107NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AK19 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm) AK20 --- HSIO98NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AK21 --- HSIO97PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AK22 --- HSIO97NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AK23 --- HSIO82PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AK24 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AK25 --- HSIO77PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AK26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AK27 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AK28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AK29 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AK30 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AK31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AK32 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AK33 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AK34 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AL1 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AL2 R_DATA[2] HSIO162NB0 Bank0 Assigned LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF R_DATA[2] AL3 --- HSIO165NB0/DQS Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL4 --- HSIO141PB0/DQS Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL5 --- HSIO139PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL6 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v AL7 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL8 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL9 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL10 --- HSIO125NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL11 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AL12 --- HSIO122NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL13 --- HSIO112PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL14 --- HSIO113NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL15 --- HSIO113PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL16 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm) AL17 --- HSIO103PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL18 --- HSIO105PB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL19 --- HSIO105NB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL20 --- HSIO101PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL21 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AL22 --- HSIO82NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL23 --- HSIO83PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL24 --- HSIO83NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL25 --- HSIO77NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL26 --- HSIO72PB1/CCC_NE_CLKIN_N_11 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL27 --- HSIO72NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AL28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AL29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) AL30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AL31 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AL32 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AL33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AL34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AM1 --- HSIO143PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM2 --- HSIO143NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM3 --- VDDI0 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v AM4 --- HSIO141NB0/DQS Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM5 --- HSIO139NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM6 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM7 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM8 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AM9 --- HSIO124PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM10 --- HSIO124NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM11 --- HSIO123PB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM12 --- HSIO112NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM13 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm) AM14 --- HSIO110PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM15 --- HSIO110NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM16 --- HSIO103NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM17 --- HSIO106PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM18 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AM19 --- HSIO101NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM20 --- HSIO96PB1/CLKIN_N_7 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM21 --- HSIO96NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM22 --- HSIO95PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM23 --- VDDI1 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI1 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm) AM24 --- HSIO91NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM25 --- HSIO74PB1/CCC_NE_CLKIN_N_10/CCC_NE_PLL0_OUT0 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM26 --- HSIO74NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM27 --- HSIO73NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AM28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AM29 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AM30 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AM31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AM32 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) AM33 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AM34 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AN1 --- HSIO142PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN2 --- HSIO142NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN3 --- HSIO138PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN4 --- HSIO138NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN5 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AN6 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN7 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN8 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN9 --- HSIO121PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN10 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm) AN11 --- HSIO123NB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN12 --- HSIO111PB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN13 --- HSIO111NB7/DQS Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN14 --- HSIO108PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN15 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AN16 --- HSIO104PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN17 --- HSIO106NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN18 --- HSIO102PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN19 --- HSIO94PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN20 --- VDDI1 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI1 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm) AN21 --- HSIO90PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN22 --- HSIO90NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN23 --- HSIO95NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN24 --- HSIO91PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN25 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AN26 --- HSIO76NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN27 --- HSIO73PB1/CCC_NE_PLL0_OUT1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AN28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AN29 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AN30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AN31 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AN32 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AN33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AN34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AP2 --- HSIO140PB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP3 --- HSIO140NB0 Bank0 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP4 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP5 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP6 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP7 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm) AP8 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP9 --- HSIO121NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP10 --- HSIO120PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP11 --- HSIO120NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP12 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AP13 --- HSIO109PB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP14 --- HSIO109NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP15 --- HSIO108NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP16 --- HSIO104NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP17 --- VDDI7 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI7 directly to 1.2v/1.5v/1.8v, or to VSS through resistor (10K ohm) AP18 --- HSIO102NB7 Bank7 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP19 --- HSIO94NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP20 --- HSIO92PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP21 --- HSIO92NB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP22 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AP23 --- HSIO93PB1/DQS Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP24 --- HSIO93NB1/DQS Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP25 --- HSIO76PB1 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP26 --- HSIO75PB1/DQS/CCC_NE_PLL0_OUT0 Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP27 --- HSIO75NB1/DQS Bank1 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON AP28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AP29 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AP30 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined AP31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AP32 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS AP33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS B1 --- GPIO250NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF B2 --- GPIO252NB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF B3 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v B4 --- GPIO253PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF B5 --- GPIO255PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF B6 --- GPIO17NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF B7 --- GPIO12NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF B8 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS B9 --- GPIO25PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF B10 --- GPIO28PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF B11 --- GPIO29NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF B12 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON B13 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v B14 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON B15 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON B16 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON B17 --- HSIO43NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON B18 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS B19 --- HSIO46PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON B20 --- HSIO47PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON B21 --- HSIO49NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON B22 --- HSIO50NB6/DQS Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON B23 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v B24 --- HSIO66PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON B25 --- HSIO68NB6/DQS Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON B26 --- HSIO71NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON B27 --- HSIO69NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON B28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS B29 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined B30 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined B31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS B32 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS B33 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined B34 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined C1 --- GPIO250PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF C2 --- GPIO252PB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF C3 --- GPIO254PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF C4 --- GPIO254NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF C5 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS C6 --- GPIO17PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF C7 --- GPIO12PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF C8 --- GPIO14NB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF C9 --- GPIO24NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF C10 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v C11 --- GPIO29PB2/CLKIN_S_9/CCC_SE_CLKIN_S_9 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF C12 --- GPIO27NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF C13 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON C14 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON C15 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS C16 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON C17 --- HSIO43PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON C18 --- HSIO45PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON C19 --- HSIO45NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON C20 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v C21 --- HSIO49PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON C22 --- HSIO50PB6/DQS Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON C23 --- HSIO52NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON C24 --- HSIO67NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON C25 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS C26 --- HSIO70NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON C27 --- HSIO71PB6/CCC_SE_CLKIN_S_15 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON C28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS C29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) C30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS C31 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined C32 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined C33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS C34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS D1 --- GPIO245NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF D2 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS D3 --- GPIO248PB2/CCC_SW_PLL1_OUT1 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF D4 --- GPIO248NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF D5 --- GPIO249PB2/CLKIN_S_3/CCC_SW_CLKIN_S_3 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF D6 --- GPIO13NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF D7 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v D8 --- GPIO14PB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF D9 --- GPIO24PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF D10 --- GPIO26PB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF D11 --- GPIO26NB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF D12 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS D13 --- GPIO27PB2/CLKIN_S_8/CCC_SE_CLKIN_S_8 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF D14 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON D15 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON D16 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON D17 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v D18 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON D19 --- HSIO42PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON D20 --- HSIO42NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON D21 --- HSIO48NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON D22 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS D23 --- HSIO52PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON D24 --- HSIO67PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON D25 LINK_OK HSIO70PB6/CCC_SE_PLL1_OUT1 Bank6 Fixed LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF LINK_OK D26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS D27 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS D28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS D29 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined D30 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined D31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS D32 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) D33 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined D34 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined E1 --- GPIO245PB2/CCC_SW_CLKIN_S_1 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF E2 --- GPIO246NB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF E3 --- GPIO247NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF E4 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v E5 --- GPIO249NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF E6 --- GPIO13PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF E7 --- GPIO15PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF E8 --- GPIO15NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF E9 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS E10 --- GPIO20PB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF E11 --- GPIO20NB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF E12 --- GPIO23NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF E13 --- GPIO22NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF E14 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v E15 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON E16 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON E17 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON E18 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON E19 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS E20 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON E21 --- HSIO48PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON E22 --- HSIO51PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON E23 --- HSIO51NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON E24 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v E25 REF_CLK_0 HSIO63PB6/CLKIN_S_12/CCC_SE_CLKIN_S_12/CCC_SE_PLL0_OUT0 Bank6 Fixed LVCMOS18 Input None No ON Up No OFF --- OFF 120 OFF --- --- --- --- --- --- REF_CLK_0 E26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS E27 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF E28 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF E29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) E30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS E31 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined E32 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined E33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS E34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS F1 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v F2 --- GPIO246PB2/DQS/CCC_SW_PLL1_OUT0 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF F3 --- GPIO247PB2/CLKIN_S_2/CCC_SW_CLKIN_S_2/CCC_SW_PLL1_OUT0 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF F4 --- GPIO244NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF F5 --- GPIO11NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF F6 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS F7 --- GPIO9NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF F8 --- GPIO9PB2/CLKIN_S_6 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF F9 --- GPIO6NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF F10 --- GPIO21NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF F11 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v F12 --- GPIO23PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF F13 --- GPIO22PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF F14 --- GPIO19PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF F15 --- GPIO19NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF F16 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS F17 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON F18 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON F19 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON F20 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON F21 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v F22 RD_BC_ERROR HSIO64NB6 Bank6 Fixed LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF RD_BC_ERROR F23 --- HSIO62PB6/DQS/CCC_SE_PLL0_OUT0 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON F24 --- HSIO62NB6/DQS Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON F25 --- HSIO63NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON F26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS F27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) F28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS F29 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined F30 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined F31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS F32 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS F33 --- XCVR_3_TX0_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined F34 --- XCVR_3_TX0_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined G1 --- GPIO243NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF G2 --- GPIO243PB5/CLKIN_W_0/CCC_SW_CLKIN_W_0 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF G3 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS G4 --- GPIO244PB2/CCC_SW_CLKIN_S_0 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF G5 --- GPIO11PB2/CLKIN_S_7 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF G6 --- GPIO10NB2/LPRB_B Bank2 User Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Probe B G7 --- GPIO8NB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF G8 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v G9 --- GPIO6PB2/CLKIN_S_4 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF G10 --- GPIO21PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF G11 --- GPIO18NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF G12 --- GPIO18PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF G13 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS G14 --- GPIO3NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF G15 --- GPIO5PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF G16 --- GPIO5NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF G17 TX HSIO37NB6 Bank6 Fixed LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF TX G18 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v G19 --- HSIO39NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON G20 --- HSIO41PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON G21 --- HSIO41NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON G22 --- HSIO64PB6/CCC_SE_PLL0_OUT1 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON G23 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS G24 --- HSIO61PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON G25 --- HSIO65NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON G26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS G27 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF G28 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF G29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) G30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS G31 --- XCVR_3_RX0_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined G32 --- XCVR_3_RX0_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined G33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS G34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS H1 --- GPIO240NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF H2 --- GPIO240PB5/CLKIN_W_1/CCC_SW_CLKIN_W_1 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF H3 --- GPIO242NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF H4 --- GPIO242PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF H5 --- VDDI5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI5 directly to 1.2v/1.5v/1.8v/2.5v/3.3v, or to VSS through resistor (10K ohm) H6 --- GPIO10PB2/LPRB_A Bank2 User Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Probe A H7 --- GPIO8PB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF H8 --- GPIO7NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF H9 --- GPIO7PB2/CLKIN_S_5 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF H10 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS H11 --- GPIO4NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF H12 --- GPIO1NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF H13 --- GPIO1PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF H14 --- GPIO3PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF H15 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v H16 --- GPIO32PB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF H17 --- GPIO32NB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF H18 RX HSIO37PB6 Bank6 Fixed LVCMOS18 Input None No ON Up No OFF --- OFF 120 OFF --- --- --- --- --- --- RX H19 --- HSIO39PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON H20 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS H21 --- HSIO36NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON H22 --- HSIO60NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON H23 --- HSIO60PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON H24 --- HSIO61NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON H25 --- HSIO65PB6/CLKIN_S_13/CCC_SE_CLKIN_S_13 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON H26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS H27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) H28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS H29 --- XCVR_3C_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF H30 --- XCVR_3C_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF H31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS H32 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) H33 --- XCVR_3_TX1_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined H34 --- XCVR_3_TX1_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined J1 --- GPIO239PB5/CLKIN_W_2/CCC_SW_CLKIN_W_2/CCC_SW_PLL0_OUT0 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF J2 --- VDDI5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI5 directly to 1.2v/1.5v/1.8v/2.5v/3.3v, or to VSS through resistor (10K ohm) J3 --- GPIO241NB5/DQS Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF J4 --- GPIO241PB5/DQS/CCC_SW_PLL0_OUT0 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF J5 --- GPIO235NB5/DQS Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF J6 --- GPIO235PB5/DQS Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF J7 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS J8 --- GPIO237PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF J9 TMS TMS --- Dedicated --- Input --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- TMS J10 TCK TCK --- Dedicated --- Input --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- TCK J11 --- GPIO4PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF J12 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v J13 --- GPIO2NB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF J14 --- GPIO2PB2/DQS Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF J15 --- GPIO0NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF J16 --- GPIO31PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF J17 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS J18 --- GPIO33PB2/CCC_SE_CLKIN_S_10 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF J19 --- GPIO33NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF J20 SPISS HSIO36PB6 Bank6 Fixed LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF SPISS J21 --- HSIO38PB6/DQS Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON J22 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v J23 --- HSIO57PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON J24 --- HSIO57NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON J25 --- HSIO59PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON J26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS J27 --- XCVR_3A_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF J28 --- XCVR_3A_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF J29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) J30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS J31 --- XCVR_3_RX1_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined J32 --- XCVR_3_RX1_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined J33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS J34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS K1 --- GPIO239NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF K2 --- GPIO238PB5/CCC_SW_PLL0_OUT1 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF K3 --- GPIO238NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF K4 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS K5 --- GPIO232PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF K6 --- GPIO233NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF K7 --- GPIO233PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF K8 --- GPIO237NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF K9 TDO TDO --- Dedicated --- Output --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- TDO K10 --- SDO --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, SDO is High-Z when the SPI interface is idle - it is only enabled when the SPI controller is outputting data, CLAMP=OFF K11 TDI TDI --- Dedicated --- Input --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- TDI K12 --- SDI --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect to VDDI3 through resistor (10K ohm), CLAMP=OFF K13 --- RESERVED --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: Must connect to VDDI3 through resistor (10K ohm). All other applications: DNC is acceptable, CLAMP=OFF K14 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS K15 --- GPIO0PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF K16 --- GPIO31NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF K17 --- GPIO35NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF K18 --- GPIO35PB2/CCC_SE_CLKIN_S_11 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF K19 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v K20 SPISDO HSIO40PB6 Bank6 Fixed LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF SPISDO K21 SPISCLKO HSIO38NB6/DQS Bank6 Fixed LVCMOS18 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF SPISCLKO K22 RESET_N HSIO55PB6 Bank6 Fixed LVCMOS18 Input None No ON Up No OFF --- OFF 120 OFF --- --- --- --- --- --- RESET_N K23 --- HSIO54PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON K24 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS K25 --- HSIO59NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON K26 --- XCVR_VREF --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect to VSS through resistor (10K ohm) K27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) K28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS K29 --- XCVR_3_RX2_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined K30 --- XCVR_3_RX2_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined K31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS K32 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS K33 --- XCVR_3_TX2_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined K34 --- XCVR_3_TX2_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined L1 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS L2 --- GPIO223NB5/DQS Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF L3 --- GPIO223PB5/DQS Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF L4 --- GPIO225PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF L5 --- GPIO232NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF L6 --- VDDI5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI5 directly to 1.2v/1.5v/1.8v/2.5v/3.3v, or to VSS through resistor (10K ohm) L7 --- GPIO236NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF L8 --- GPIO236PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF L9 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF L10 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF L11 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS L12 --- IO_CFG_INTF --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect to VSS through resistor (10K ohm), CLAMP=OFF L13 --- SPI_EN --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect to VSS through resistor (10K ohm), CLAMP=OFF L14 --- SCK --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect to VSS through resistor (10K ohm), CLAMP=OFF L15 --- DEVRST_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect to VDDI3 through 1k ohm resistor (not to be shared with any other pins), CLAMP=OFF L16 --- VDDI2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Due to Probe: 2.5v/3.3v L17 --- GPIO30PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF L18 --- GPIO34NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF L19 --- GPIO34PB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF L20 SPISDI HSIO40NB6 Bank6 Fixed LVCMOS18 Input None No ON Up No OFF --- OFF 120 OFF --- --- --- --- --- --- SPISDI L21 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS L22 --- HSIO55NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON L23 --- HSIO54NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON L24 --- HSIO58NB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON L25 --- HSIO58PB6 Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON L26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS L27 --- XCVR_1C_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF L28 --- XCVR_1C_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF L29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) L30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS L31 --- XCVR_3_RX3_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined L32 --- XCVR_3_RX3_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined L33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS L34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS M1 --- GPIO221NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF M2 --- GPIO221PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF M3 --- VDDI5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI5 directly to 1.2v/1.5v/1.8v/2.5v/3.3v, or to VSS through resistor (10K ohm) M4 --- GPIO225NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF M5 --- GPIO234NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF M6 --- GPIO234PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF M7 --- GPIO231NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF M8 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS M9 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF M10 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF M11 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF M12 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF M13 --- VDDI5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI5 directly to 1.2v/1.5v/1.8v/2.5v/3.3v, or to VSS through resistor (10K ohm) M14 --- SS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect to VSS through resistor (10K ohm), CLAMP=OFF M15 --- VDD25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD25 to 2.5v M16 --- VDDAUX2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDAUX2 directly to 2.5v/3.3v, or to VSS through resistor (10K ohm) M17 --- GPIO30NB2 Bank2 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI2 through resistor (10K ohm) is allowed. CLAMP=OFF M18 --- VDDAUX2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDAUX2 directly to 2.5v/3.3v, or to VSS through resistor (10K ohm) M19 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS M20 --- VDDAUX2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDAUX2 directly to 2.5v/3.3v, or to VSS through resistor (10K ohm) M21 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v M22 --- HSIO56PB6/DQS Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON M23 --- HSIO56NB6/DQS Bank6 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDD18 through resistor (10K ohm) is allowed. CLAMP=ON M24 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v M25 --- VDDI6 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.8v M26 --- XCVR_VREF --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect to VSS through resistor (10K ohm) M27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) M28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS M29 --- XCVR_1_RX0_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined M30 --- XCVR_1_RX0_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined M31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS M32 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) M33 --- XCVR_3_TX3_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined M34 --- XCVR_3_TX3_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined N1 --- GPIO220NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF N2 --- GPIO220PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF N3 --- GPIO224NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF N4 --- GPIO224PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF N5 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS N6 --- GPIO228NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF N7 --- GPIO228PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF N8 --- GPIO231PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF N9 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF N10 --- VDDI5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI5 directly to 1.2v/1.5v/1.8v/2.5v/3.3v, or to VSS through resistor (10K ohm) N11 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF N12 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF N13 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF N14 TRSTB TRSTB --- Dedicated --- Input --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- TRSTB N15 --- VDDAUX5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDAUX5 directly to 2.5v/3.3v, or to VSS through resistor (10K ohm) N16 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS N17 --- VDDAUX2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDAUX2 directly to 2.5v/3.3v, or to VSS through resistor (10K ohm) N18 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS N19 --- VDDAUX2 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDAUX2 directly to 2.5v/3.3v, or to VSS through resistor (10K ohm) N20 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS N21 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v N22 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS N23 --- VDD18 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD18 to 1.8v N24 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS N25 --- VDD_XCVR_CLK --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD_XCVR_CLK directly to 2.5v/3.3v when VDDA is connected to 1.0V/1.05V. If VDDA is connected to VSS, VDD_XCVR_CLK must connect to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDD_XCVR_CLK to VSS through resistor (10k ohm) N26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS N27 --- XCVR_1A_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF N28 --- XCVR_1A_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF N29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) N30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS N31 --- XCVR_1_TX0_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined N32 --- XCVR_1_TX0_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined N33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS N34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS P1 --- GPIO211PB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF P2 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS P3 --- GPIO222NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF P4 --- GPIO222PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF P5 --- GPIO229NB5/DQS Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF P6 --- GPIO229PB5/DQS Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF P7 --- VDDI5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI5 directly to 1.2v/1.5v/1.8v/2.5v/3.3v, or to VSS through resistor (10K ohm) P8 --- GPIO230NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF P9 --- GPIO230PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF P10 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF P11 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF P12 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS P13 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF P14 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF P15 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS P16 --- VDDAUX5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDAUX5 directly to 2.5v/3.3v, or to VSS through resistor (10K ohm) P17 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS P18 --- VDDI3 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI3 to 1.8v/2.5v/3.3v P19 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS P20 --- VDDI3 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI3 to 1.8v/2.5v/3.3v P21 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS P22 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v P23 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS P24 --- VDD25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD25 to 2.5v P25 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS P26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS P27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) P28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS P29 --- XCVR_1_RX1_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined P30 --- XCVR_1_RX1_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined P31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS P32 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS P33 --- XCVR_1_TX1_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined P34 --- XCVR_1_TX1_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined R1 --- GPIO211NB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF R2 --- GPIO213NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF R3 --- GPIO213PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF R4 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v R5 --- GPIO227PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF R6 --- GPIO227NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF R7 --- GPIO226PB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF R8 --- GPIO226NB5 Bank5 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF R9 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS R10 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF R11 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF R12 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF R13 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF R14 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF R15 --- VDDI5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI5 directly to 1.2v/1.5v/1.8v/2.5v/3.3v, or to VSS through resistor (10K ohm) R16 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS R17 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v R18 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS R19 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v R20 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS R21 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v R22 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS R23 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v R24 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS R25 --- VDDA25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA25 directly to 2.5v or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDD25A to VSS through resistor (10K ohm) R26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS R27 --- XCVR_1B_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF R28 --- XCVR_1B_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF R29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) R30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS R31 --- XCVR_1_RX2_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined R32 --- XCVR_1_RX2_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined R33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS R34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS T1 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v T2 --- GPIO209NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF T3 --- GPIO209PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF T4 --- GPIO217NB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF T5 --- GPIO217PB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF T6 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS T7 --- GPIO218PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF T8 --- GPIO219NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF T9 --- GPIO219PB4/CLKIN_W_3/CCC_SW_CLKIN_W_3 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF T10 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF T11 --- VDDI5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDI5 directly to 1.2v/1.5v/1.8v/2.5v/3.3v, or to VSS through resistor (10K ohm) T12 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF T13 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF T14 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF T15 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS T16 --- VDDAUX5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDAUX5 directly to 2.5v/3.3v, or to VSS through resistor (10K ohm) T17 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS T18 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v T19 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS T20 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v T21 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS T22 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v T23 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS T24 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v T25 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS T26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS T27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) T28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS T29 --- XCVR_1_RX3_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined T30 --- XCVR_1_RX3_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined T31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS T32 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) T33 --- XCVR_1_TX2_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined T34 --- XCVR_1_TX2_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined U1 RX_N GPIO212NB4 Bank4 Fixed LVDS25 Input None No ON None No OFF MID ON 100 OFF --- --- --- --- --- --- RX_N U2 RX_P GPIO212PB4 Bank4 Fixed LVDS25 Input None No ON None No OFF MID ON 100 OFF --- --- --- --- --- --- RX_P U3 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS U4 REFCLK_P GPIO215PB4/CLKIN_W_5/CCC_NW_CLKIN_W_5 Bank4 Fixed LVDS25 Input None No ON None No OFF MID ON 100 OFF --- --- --- --- --- --- REFCLK_P U5 REFCLK_N GPIO215NB4 Bank4 Fixed LVDS25 Input None No ON None No OFF MID ON 100 OFF --- --- --- --- --- --- REFCLK_N U6 --- GPIO214PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF U7 --- GPIO218NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF U8 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v U9 --- GPIO216NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF U10 --- GPIO216PB4/CLKIN_W_4/CCC_NW_CLKIN_W_4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF U11 PHY_RST GPIO206NB4 Bank4 Fixed LVCMOS25 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF PHY_RST U12 coma_mode GPIO206PB4 Bank4 Fixed LVCMOS25 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF coma_mode U13 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS U14 --- NC --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI5 through resistor (10K ohm) is allowed. CLAMP=OFF U15 --- VDDAUX5 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDAUX5 directly to 2.5v/3.3v, or to VSS through resistor (10K ohm) U16 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS U17 --- VDD25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD25 to 2.5v U18 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS U19 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v U20 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS U21 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v U22 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS U23 --- VDD25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD25 to 2.5v U24 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS U25 --- VDDA25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA25 directly to 2.5v or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDD25A to VSS through resistor (10K ohm) U26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS U27 --- XCVR_0C_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF U28 --- XCVR_0C_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF U29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) U30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS U31 --- XCVR_1_TX3_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined U32 --- XCVR_1_TX3_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined U33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS U34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS V1 TX_P GPIO210PB4 Bank4 Fixed LVDS25 Output None No ON None No --- --- --- 100 --- OFF 6 --- 5 OFF OFF TX_P V2 TX_N GPIO210NB4 Bank4 Fixed LVDS25 Output None No ON None No --- --- --- 100 --- OFF 6 --- 5 OFF OFF TX_N V3 --- GPIO208PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF V4 --- GPIO208NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF V5 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v V6 --- GPIO214NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF V7 --- GPIO198NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF V8 --- GPIO198PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF V9 --- GPIO201PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF V10 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS V11 --- GPIO205NB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF V12 --- GPIO205PB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF V13 --- GPIO203PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF V14 --- GPIO207PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF V15 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v V16 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v V17 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS V18 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v V19 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS V20 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v V21 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS V22 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v V23 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS V24 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v V25 --- VDD_XCVR_CLK --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDD_XCVR_CLK directly to 2.5v/3.3v when VDDA is connected to 1.0V/1.05V. If VDDA is connected to VSS, VDD_XCVR_CLK must connect to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDD_XCVR_CLK to VSS through resistor (10k ohm) V26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS V27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) V28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS V29 --- XCVR_0_RX0_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined V30 --- XCVR_0_RX0_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined V31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS V32 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS V33 --- XCVR_0_TX0_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined V34 --- XCVR_0_TX0_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined W1 --- GPIO194PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF W2 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v W3 --- GPIO193NB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF W4 --- GPIO193PB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF W5 --- GPIO195PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF W6 --- GPIO197PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF W7 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS W8 --- GPIO199PB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF W9 --- GPIO201NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF W10 --- GPIO200PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF W11 --- GPIO202PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF W12 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v W13 --- GPIO203NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF W14 --- GPIO207NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF W15 --- VDDAUX4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v W16 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS W17 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v W18 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS W19 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v W20 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS W21 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v W22 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS W23 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v W24 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS W25 --- VDDA25 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA25 directly to 2.5v or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDD25A to VSS through resistor (10K ohm) W26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS W27 --- XCVR_0A_REFCLK_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF W28 --- XCVR_0A_REFCLK_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined. Connection to VSS through resistor (100K ohm) for higher noise immunity is allowed. CLAMP=OFF W29 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) W30 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS W31 --- XCVR_0_RX1_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined W32 --- XCVR_0_RX1_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined W33 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS W34 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS Y1 --- GPIO194NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF Y2 --- GPIO192NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF Y3 --- GPIO192PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF Y4 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS Y5 --- GPIO195NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF Y6 --- GPIO197NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF Y7 --- GPIO196PB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF Y8 --- GPIO199NB4/DQS Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF Y9 --- VDDI4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v Y10 --- GPIO200NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF Y11 --- GPIO202NB4 Bank4 Unassigned --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- DNC, LiberoSOC Defined High-Z with weak pull up ON. Connection to VDDI4 through resistor (10K ohm) is allowed. CLAMP=OFF Y12 PHY_MDC GPIO204PB4 Bank4 Fixed LVCMOS25 Output None No ON None No --- --- --- 120 --- OFF 8 --- 5 --- OFF PHY_MDC Y13 PHY_MDIO GPIO204NB4 Bank4 Fixed LVCMOS25 Inout None No ON Up No OFF --- OFF 120 OFF OFF 8 --- 5 --- OFF PHY_MDIO Y14 --- VDDAUX4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v Y15 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS Y16 --- VDDAUX4 --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 2.5v Y17 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS Y18 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v Y19 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS Y20 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v Y21 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS Y22 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v Y23 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS Y24 --- VDD --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 1.0v Y25 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS Y26 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS Y27 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) Y28 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS Y29 --- XCVR_0_RX2_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined Y30 --- XCVR_0_RX2_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (100K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined Y31 --- VSS --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- VSS Y32 --- VDDA --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Must connect VDDA directly to 1.0v/1.05v, or to VSS through resistor (10K ohm). For PolarFire CORE devices: Must connect VDDA to VSS through resistor (10K ohm) Y33 --- XCVR_0_TX1_P --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined Y34 --- XCVR_0_TX1_N --- Reserved --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- Safety Critical Applications: DNC, LiberoSOC Defined. Connect to VSS through resistor (10K ohm) for higher noise immunity is allowed. All other applications:DNC, LiberoSOC Defined ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -"DNC" Do Not Connect, reserved, leave floating. These pins are physically connected to the die. But the designer must leave floating to avoid unwanted leakages. -"NC" No Connection - No connection to die. These pins can be used for board level signal routing by the designer if needed when migrating designs to larger devices in the same package. -"Vref" The pin is set as a VREF pin -"Probe A" Programmed as output for probeA -"Probe B" Programmed as output for probeB -"Due to Probe" Probe is on, therefore bank voltage must be 2.5V or 3.3V -"Open Drain" Tribuff IOs where the D is connected to 0 and the E is routed. -* Libero configures unused User IO (GPIO, HSIO) as: Input Buffer Disabled, Output Buffer Tristated, Weak Pull-up. -** Even if the IO bank is not being used, users must connect this VDDIx and VDDAUXx to a rail that meets the specifications of this IO bank.See "Polarfire and PolarFire SoC FPGA Power-up and Resets User Guide" for a detailed explanation. -*** Tie-offs to VSS can be ganged to a single 10K Ohm resistor. User can also add more 10K Ohm resistors if it eases board level routing. -**** XCVR_RX tie-offs to VSS can be ganged to an appropriately sized single 100K Ohm resistor to ease board level routing. Each XCVR_RX draws approximately 10uA. -***** Package Parasitics : Only digital IOs balls have individual and complete parasitic values. Power Parasitics are lumped together and will be reported only on one power ball line per power type. VSS does not have parasitic values because it is used as return path. -****** The embedded PCIe controller subsystem (PCIESS) is available only within Quad_0 "XCVR_0" Lanes. See User Guide "PolarFire FPGA and PolarFire SoC FPGA PCI Express" for more information on the embedded PCIE capabilities and its usage. -******* Preferred clock connectivity should be referenced in "PolarFire FPGA and PolarFire SoC FPGA Clocking Resources User Guide" before completion of PCB design. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------